Models > TU8000XRP2 > Instructions

TU8000XRP2 Whirlpool Trash Compactor - Instructions

Jump to:

All Instructions for the TU8000XRP2
106 - 108 of 108
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Charles from Goshen, KY
Parts Used:
882699
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Broken plastic drive gear
Very simple, changed the gear, adjusted the drive and tested. Very straight forward.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BRUCE from CASPER, WY
Parts Used:
WP777811
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
compactor will not stop when compaction complete on top cycle
take 2 screws out on top cover with key switch. remove two screw holding directional switch. remove wires, one at a time, and place on the new switch. put new switch in place with two screws. put front cover on with two screws and test. works like a charm.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian R from Hot Springs, AR
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Drive gear worn out, because I put glass bottles in it. Should'nt do that.
Followed PartsSelect instructions, the Compactor was appoximately $1000. when I purchased it. The kit was $26.14. I will forever be a customer of this company. Thank you, Brian
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the TU8000XRP2
106 - 108 of 108