Models > 4KUCC151T0 > Instructions

4KUCC151T0 KitchenAid Trash Compactor - Instructions

Jump to:

All Instructions for the 4KUCC151T0
106 - 120 of 131
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
jeff from lincoln, AR
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
stripped pinion gear
I took the hex screws out with a nut driver and then punched out the role pin in the pinion gear (the little gear) and replaced it along with the large gear, less than 15 minutes. I was surprised how fast (day and a half) the parts were here.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Memphis, TN
Parts Used:
WP777533
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Power nut was cracked. Had to replace with new.
Used visuals from partselect web site to dismantle the trash compactor , remove broken power nut , order new nuts. Only took a few days to receive new nuts. Replaced nuts , put back together and now works fine.
Was this instruction helpful to you?
Thank you for voting!
Customer:
wayne from angelus oaks, CA
Parts Used:
WP777533
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
ram uneven and drawer would not close
refloored the floor and so the unit would not come out. had to cut tile, broke edge off of formica counter but once the unit was out a piece of cake. 6 self tapping screws removed , right on the top, two screws holding the cover for the power nuts, replaced broken nut, leveled ram, replaced nuts and ready to slide back in. After thought, I had one nut on hand from a few years earlier. I ordered two new nuts and now i am going to pull the unit again and replace both nuts. thought being a longer period before having to do this again. The unit was put in in 1981 and used continuously.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from Saint Louis, MO
Parts Used:
WP777811, WP777533
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Would not turn off after crush cycle.
Ordered three parts, however if I had read your repair page more thoroughly I could have avoided buying the top of cycle off switch. Oh well... This thirty year old trash compactor is back in business running like a new one. My one recommendation? READ YOUR FAQ PAGE. It will save you money.dan
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 4KUCC151T0
106 - 120 of 131