Models > ZCGP150RII-00 > Instructions

ZCGP150RII-00 General Electric Trash Compactor - Instructions

Jump to:

All Instructions for the ZCGP150RII-00

Customer:: Larry from Slaughter, LA
Parts Used:: WC21X20249
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Screw drivers

Motor kept running @ end of cycle. Had to open door and power off after each cycle

Unplugged unit. Took basket out, slide unit out, remove top and front panel. Remove power switch to get to the two directional switches. Disconnected the one on right be cause the arm was loose and not operating. Removed it and replaced it with new switch. Part #WC21X10004. Put it all back together and it works right.

Was this instruction helpful to you?

Customer:: Jim from Escalon, CA
Parts Used:: WC26X10006
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Wrench set

Humming noise when first started.

Like others said, I think the old motor itself was good but I will never know. I could get it to work by working the chain to move the gear. The good news is the new motor made everything work. It is a little quieter. I kept the old gear instead of using the replacement that came with it. Two nuts are hard to get to because the gear and chain is in the way. I had to pull on the gear away from the motor to gain access. I expected my 3 year old GE compactor to last longer than it did. I don't recommend buying another one. The new motor has been working good for 1 week now. I can't believe how fast the delivery was. Only 2 days. 237 dollars.

Was this instruction helpful to you?

Customer:: angelo from downey, CA
Parts Used:: WC26X10006
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Socket set

the yellow and bluewires were crossed on the pigtail.

i cut the yellow and blue wire in the middle and crossed them and spliced them back togetor.

Was this instruction helpful to you?

All Instructions for the ZCGP150RII-00