31AH55Q8711 Troy-Bilt Snow Blower - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jim from Woodbridge, VA
- Parts Used:
- 946-04619B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Original cable laid on muffler and melted plastic into the cable housing, seizing cable.
Only part of repair that took a few seconds was making sure the blower chute moved fully to the right and left. Lucky, the fix is remove cotter pin on the hex shaft, move handle and chute fully to the right or left reinstall hex, check for full swing, replace cotter pin. The cable end is barbed, but can be removed with a twisting pull.
Was this instruction helpful to you?
Thank you for voting!