I1224E (1695659) Simplicity Snow Blower - Parts

This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. Th...

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distribut...

This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive be...

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and ...

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary ...

This is an authentic manufacturer-sourced cotter pin. It is a standard hardware commonly used on a variety of Craftsman lawn and garden equipment. Depending on the model of your unit it will be used i...

This is a genuine replacement part sourced from the original manufacturer for use with dual snow throwers made by Murray, Snapper and Simplicity. This part gives tension between the idler pulley brack...

This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.

This is a genuine Murray, Snapper, and Simplicity part sourced directly from the manufacturer for use in snowthrowers. The clutch spring boot is made out of rubber. A set of pliers may be necessary du...

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capsc...

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is a genuine manufacturer-approved component which is specially made for use with Murray and Snapper snowthrowers. The purpose of this pulley is to apply tension to the belt. It provides an ident...