LP1695441-928E (2008) Murray Snow Blower - Parts

It is an authentic OEM part which is specially designed for Murray riding lawn mowers and garden tractors. This is one of the push nuts that help to secure the pivot rod. If your hardware is damaged o...

This is an authentic OEM replacement part designed for use with Murray lawn and garden equipment. This bolt is a standard hardware which has multiple uses based on your equipment. Please check diagram...

This is a genuine replacement part sourced from the original manufacturer for use with dual snow throwers made by Murray, Snapper and Simplicity. This part gives tension between the idler pulley brack...

This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provid...

This genuine item is supplied by the original equipment manufacturer for use with Murray, Simplicity and Snapper lawn mowers. It is the special retaining ring for the wheel. If the hardware is missing...

It is a genuine item that is supplied by the original equipment manufacturer for use with snowthrowers and snowblowers made by Murray, Snapper, and Simplicity. The bushing goes next to the worm chute ...

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering sp...

This is a genuine OEM supplied component which is specially designed for use with Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or a faulty screw that w...

It is an authentic OEM sourced item which is specially produced for use with Murray, Snapper, and Simplicity snowthrowers. The axle bearing fits between the axle shaft and the flatwasher and helps to ...

This universal block is an OEM direct from Craftsman for snow blowers and snow throwers. This part adds space between the augur housing and the brush retainer clip. You may need pliers to replace this...

This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.

This universal joint pin is an OEM part from Murray, Snapper and Simplicity. This is used on snow blowers, snow throwers and electric start snow blowers. This part holds the rod assembly and yoke to t...