ME16H702SES Samsung - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- ROBERT from GLEN BURNIE, MD
- Parts Used:
- DE96-00414A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
WHEN I CLOSED DOOR IT WOULD HUMM
REPLACED DOOR SWITCH ASSEMLY
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from CALIFORNIA, KY
- Parts Used:
- WPM0805101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
No power to any microwave functions
Access is via RT. SIDE Panel as you face microwave. There are three screws on the bottom right edge to loosen. After that the side panel slips down and off. the fuse is located in the rear near where the power cord comes in. It is the white ceramic tube 1/4" in dia. and 1-1/2" long. Pull it out like any fuse and replace with new one. Reassemble and you are done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nick from Fenton, MO
- Parts Used:
- DE67-40063A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Suspect light bulb was touching glass, and cracked glass due to too much heat.
I unscrewed one screw and droped the glass light bulb cover, bent the light bulb up so it wouldn't break the glass again, removed the broken glass and installed new glass by bending the tabs over the glass to hold it in place and re-inserted the cover, then screwed the retaining screw back in. Done in 3 min.. PartsSelect.com seems to be one of the few online parts ordering place that has schematics and easy to navigate site. Perfecto!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frances from CRESCENT CITY, CA
- Parts Used:
- DE63-00624A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Glass broke
The tray was exactly what I needed. The price was excellent!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy from RENO, NV
- Parts Used:
- DE63-00624A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken carousel plate
Placed new plate in oven.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SANDRA from GLENDO, WY
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
microwave door
We did not use the part, the spring fell off inside the door. We kept the part just in case
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from ROCHESTER, MN
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The plastic door key (latch) broke where the spring attaches.
I took off the inner plastic frame of the door, removed the broken part, hooked the spring up to the new latch and replaced it into the proper alignment holes, and works perfectly. It was less than a 5 minute repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matt from Oswego, IL
- Parts Used:
- DE64-01308A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door latch broke off
Use knife to peel back molding around latch openings. Pull down on plastic latch part, pull out bottom and tilt up to remove broken part from spring. Tilt top of new part inward and connect tab to spring. Push in bottom of latch and snap. Replace the molding by pushing all around the door frame.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dianne from Danville, VT
- Parts Used:
- DE64-01308A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door did not stay latched
After removing the door from the OTR microwave, we slid out the old latch, slid in the new, & reattached the spring. Replaced the door & DONE.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Pecatonica, IL
- Parts Used:
- DE64-01308A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door latch broken
Used a putty knife to take off the edging inside the door to have access to the latch. Put the new part in and attached the spring. Replaced the edging and job was complete.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BRUCE from LA QUINTA, CA
- Parts Used:
- DE64-01308A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door Latch Broken - Door Did Not Close
Got part from you in one day - great- watched utube video on removing molding and reinstalling. Video was longer than time to fix all need to do was remove molding and install the door latch - it is made of plastic with a hook on which to attach spring. Hook breaks and therefore door does not close
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia M. from Edison, NJ
- Parts Used:
- DE64-01308A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The door on microwave would not stay shut.
Called Maytag regarding the latch. Was told I had to order an entire new door that would cost around $170 before shipping and handling. Went on partselect and foundt he part for $2.02. Big difference in price. Very easy to install. Hardest part was getting the spring back on. Would definitely recommend to friends.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from Pedricktown, NJ
- Parts Used:
- DE47-20059B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Was this instruction helpful to you?
Thank you for voting!