Models
>
RD80704
RD80704 Ridgid Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RD80704
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This thermal release valve is for pressure washers.
Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...
No Longer Available
This is a genuine OEM sourced replacement part designed for use with Ridgid pressure washers. It is the essential part of the unit allowing to direct and control the spray. Please note the wand is sol...
No Longer Available
This is an OEM part sourced from the original manufacturer for use with pressure washers. This stainless steel spray wand screws into the trigger handle assembly, giving a 21" reach. One spray wand is included.
No Longer Available
$6.51
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution...
In Stock
Order now and your part arrives by Apr 6
$2.99
This authentic item is supplied directly from the original equipment manufacturer for use with pressure washers and generators. The wear pad is made of hard rubber and attaches to the foot bracket wit...
Special Order
This is an authentic OEM replacement part guaranteed to fit the pressure washers listed below. This dual power soap nozzle can be adjusted for either short or long range detergent application. If no d...
No Longer Available
This seal is designed for pressure washers made by Ridgid, Homelite and Ryobi. It is made of metal and fits onto the idle down assembly. A wrench may be required while replacing this part. Please keep...
No Longer Available
This is a genuine OEM sourced replacement part. The quick disconnect is intended to be used with pressure washers from Ridgid, Ryobi, and Homelite. The quick disconnect is used a the female portion of...
No Longer Available
This genuine manufacturer sourced replacement part that is specially produced for use with Ryobi, Ridgid and Homelite equipment. A lock nut is a type of nut that resists loosening when properly thread...
No Longer Available
This assembly uses a control wire inserted directly into the throttle arm to control engine's speed. If your engine doesn't idle down replacing this part should resolve the issue. Please make sure to ...
No Longer Available
$6.51
This is a genuine Ridgid replacement part. Constructed of durable plastic with a metal screw, the handle gives the user added control of the device. This part has been designed to simply twist into th...
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
July 4, 2023
when i turn on the gas it starts leaking gas
For model number RD80704
Hello Charles, thank you for the question. According to our research, the reason that the carburetor is leaking is because the float needle is not seating against the seat and is allowing too much fuel to bypass through the carburetor and it usually drains out through the air filter. We would recommend checking the carburetor assembly, part number FIX11851993, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for RD80704
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JAMES from PORT DEPOSIT, MD
- Parts Used:
- 308661004
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable), Wrench set
Old quick connect seized up corrosion.
Wrench off wrench on after applying Teflon pipe thread tape
Was this instruction helpful to you?
Thank you for voting!