Models
>
RD80704
RD80704 Ridgid Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RD80704
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This thermal release valve is for pressure washers.
Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...
No Longer Available
Special Order
In Stock
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
July 4, 2023
when i turn on the gas it starts leaking gas
For model number RD80704
Hello Charles, thank you for the question. According to our research, the reason that the carburetor is leaking is because the float needle is not seating against the seat and is allowing too much fuel to bypass through the carburetor and it usually drains out through the air filter. We would recommend checking the carburetor assembly, part number FIX11851993, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for RD80704
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JAMES from PORT DEPOSIT, MD
- Parts Used:
- 308661004
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable), Wrench set
Old quick connect seized up corrosion.
Wrench off wrench on after applying Teflon pipe thread tape
Was this instruction helpful to you?
Thank you for voting!