5GBB2258EA00 Whirlpool Refrigerator - Instructions

Finding the part that I needed was incredibly easy. I usually leave all repairs to my husband but I was getting frustrated that my vegetables were freezing due to the drawer laying right on the wall dividing the freezer area. I took it upon myself to search for parts by using the refrigerator model number, This site is the BEST!! By providing pictures of the parts and where they go I was able to order the correct one. It arrived within a few days and I installed it in less than 5 minutes. I was relieved that I had ordered the correct part and my husband was pleasantly surprised that I took care of it myself. Thanks

I had to remove the 2 drawers, naturally, but then found I also had to remove the glass shelf and bracket that holds them, because the end of the center rail had broken off and stuck in the recess of the shelf. No problem. Washed the shelf and the end piece fell out, eliminating the need for pliers or tweezers. Put the new center rail in place, replaced the shelf, replaced the 2 crisper drawers and, "voila" - good as new (until next time some big, strong guy slams the crisper drawer). Thanks for quick delivery; I don't often get in the mood to fix things, so when I do it's nice the part arrives before my fixing-muse flies away.

Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.

just pushed glass up out of frame and then dropped new one in. pretty simple fix.

Replaced crisper

Excellent service.............part received 28hrs after ordering.

Took off the broken rail and dropped in the new one with only a slight pressure of the plastic shelf frame shelf. Took about 30 seconds.

Removed drawers, lifted glass shelf, installed new part

I simply removed the drawers and replaced the assembly. I didn't even need tools!
The part arrived so quickly and it was easy to find. I will definitely use part select again!

Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.

The entire process took lees than 5 minutes. I simply removed the broken rail, and inserted the new one. Voila! Like new!

The rail had broken off, so there was nothing to remove, except the crisper drawers. I had called an amana repair service and the repairman told the part was about $9 and the cost to install was $127. When I almost fainted, he told me I could probably do it myself. Wow, was he right! I ordered the part, it came in about 2 days, I looked at the rail, removed the glass shelf, hooked the rail into the little opening at the back, and bang! All done. It took me 10 seconds!!

Great service. Unpluged old switch and pluged in new one. Works great

disconnected el. power to fridge. pried out broken switch with small screwdriner and pulled out w/water pump pliers. installed new switch and pressed into opening.

After disconnecting the electricity. I followed the instructions as indicated in the "HOW TO" article on the website. I used a steel putty knife and pried the light switch out of its retaining hole. I worked the right side the most since this is the side with the retaining clip. After I removed the switch I transferred the two electrical outlets to the new switch and easily snapped it into place. Engaged the electric power and tested the switch.