ED25DQXAW01 Whirlpool Refrigerator - Parts

This part may be too long for your appliance and may need to be cut to fit your specific dimensions.

This part attaches to the drive shaft of the ice dispenser motor.

This water inlet valve is for the ice maker and water dispenser in the refrigerator. To remove outlet tubing, depress ring that the tube slides into. Please remember to disconnect the power and water ...

This part screws into the side of the wall in your fresh food compartment and supports a shelf.

This part may come with a plastic or metal auger depending on the factory. It will work with your appliance if found with the model number. (Make sure you install properly at back of ice container, be...

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This clip is sold individually.

Support wheel assembly with bracket. Kit of 2.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This part helps to slide the drawer in and out. It mounts to the inside wall of your refrigerator.

This part helps to slide the drawer in and out. It mounts to the inside wall of your refrigerator.