Models > ET18CKXMWR2 > Instructions

ET18CKXMWR2 Whirlpool Refrigerator - Instructions

Jump to:

All Instructions for the ET18CKXMWR2
121 - 135 of 148
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Maxine from Henderson, NV
Parts Used:
482731
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
The fan in the freezer was squealing
Took the old fan out and put the new fan in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Arlington, MA
Parts Used:
W11384469
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Both light bulbs had been replaced, but lights did not turn on.
I tried to remove the old light switch using a putty knife and a hammer. It was hard to compress the plastic tabs to pull it back through the hole, but all of a sudden, the lights came on. I guess banging on the switch freed-up the contacts. The new switch is now a spare part in case I need it.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ET18CKXMWR2
121 - 135 of 148