WRF532SMHB04 Whirlpool Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Howard from Boynton Beach, FL
- Parts Used:
- 350930
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Lawrenceburg, KY
- Parts Used:
- 12002497
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Drawer bar gear had a broken plastic piece that would not hold the bar in place
Looked at the appliance's booklet to see how it fit together, then installed it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Jackson, AL
- Parts Used:
- W10830189
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
lower gasket cover torn
TAKE NOTE HOW OLD GASKET IS ORIENTED!!!old gasket can be removed by starting to pull out at top left hand corner, there is just enough space behind hinged door flap to put a finger behind the gasket and moving down and behind the flap remove gasket from it's slot, once you reach the bottom of the door the rest of the gasket is very easily removed. If new gasket is deformed in shipping, use a hair dryer to help staighten. Loop new gasket over shelf inside door. start at top left corner and continue inserting gasket into it's slot all the way round.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- william from newport, VT
- Parts Used:
- W10443315
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Socket set
old magnet seal ripped open on top
very basic (I repaired appliances for 10 yrs for Sears and my own shop)make sure you apply heat(hair dryer) to have seal in perfect square shape soft etc ,I removed freezer door put plastic tarp to keep cold in, laid door on table for ease of installation replaced gasket put door back on tout fini ps if you want lay on floor go for it at 75 yrs old not for me Newport VT
Was this instruction helpful to you?
Thank you for voting!