Models > WRS331SDHB02 > Instructions

WRS331SDHB02 Whirlpool Refrigerator - Instructions

Jump to:

All Instructions for the WRS331SDHB02
76 - 90 of 270
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Charles from Dearborn Heights, MI
Parts Used:
WP2152713
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Ice maker nod dispensing cubed ice.
Disassembled freezer icemaker rear panel and replaced defective part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Shawn from ROSWELL, GA
Parts Used:
4388736
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
The original was broken.
Take it apart, replace with the new one, put it back together. So simple even a democrat girl could do it.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Billy from Goldsboro, NC
Parts Used:
4388736
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Ice bin auger drum fins broke off from the main shaft,stopping the production of crushed ice.
Replaced the Ice Bin Auger,I ordered from PartSelect,which had much thicker housing and fins than the original .You remove the clip from the end of the shaft and a nylon nut which is a left hand which is opposite threads from most nuts.Its a good idea to take a picture of how the blades and spacers are ,because if not put back in the same direction their will be no crushed ice.It now works better and quiter than when it was new.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dominique from BURLESON, TX
Parts Used:
W11188040
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Broken glass shelf top
I remove the shelf above of the one that needing repair as well the one that required repair. I carefully place the white shelf frame into the rubber seals on the glass . Thirdly placed everything together.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CRAIG from UNDERWOOD, MN
Parts Used:
W11371713
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Holder broke along side towards the front
Slid weatherstripping off old and slid it on to new, replaced it into fridge
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Merrill from CHULA VISTA, CA
Parts Used:
W11162448
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken plastic drawer
Pull out old drawer, push in new drawer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wanda from WILLIAMSTON, NC
Parts Used:
W11188040
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Added another shelf
Just slid it in place
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jillian from Old Saybrook, CT
Parts Used:
W11163764
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Handle was very scratched
Very easy to install new handle. Used hex screw driver to remove screws at top and bottom of handle. Handle easily lifted off. Then installed new handle and tightened existing screws. No issues. Took 5 minutes. New handle fit perfectly and looks great.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from PORT JERVIS, NY
Parts Used:
W11396033
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
No problems
Just plugged it in
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cathy from HOPATCONG, NJ
Parts Used:
W11384469
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Light rocker switch broke and refrigerator light couldn't go on.
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carolee from Spokane Valley, WA
Parts Used:
W11384469
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light switch broke
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carlton from CHICAGO, IL
Parts Used:
W11396033
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light out.
Popped out the old switch and replaced it with the one dying
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from OCONOMOWOC, WI
Parts Used:
WPW10300022
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Icemaker stopped working. Would not eject ice.
Repair was straightforward.
Loosen two screws, remove and reuse one screw. Side by side freezer made it a cramped work space.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
EUEL from NICHOLS, SC
Parts Used:
4388736
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Drum was broken
Replaced drum and reassembled unit.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JOEL from LUMBERTON, MS
Parts Used:
W11671282
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
ice will not dispense ice from storage bin to out the door. Auger does not turn
Replaced motor it was not issue. Now I am stuck with a $300 motor I cannot return. When I say will not dispense ice everyone thinks it does not make ice. Auger does not turn to push ice out the door. Reason I thought it was auger motor when you push lever on door the auger turns about one eight of a turn. So, it would seem it is getting signal and power. Cannot find any articles on this specific issue. If anyone has a suggestion, please share.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS331SDHB02
76 - 90 of 270