MRTD23V6MM1 Uni Refrigerator - Instructions

Installation was fairly straight forward. The major complaint is that the problem returned 2 weeks later. I don’t know if I care to re-invest in another switch.
Now what?

Remove lower cardboard refrigerator panel. Carefully pull existing cracked fan blade off of the motor shaft and replace with new fan blade. Reinstall cardboard panel.

I used the youtube you provided. It was pretty straight forward, but I had to make a trip to the hardware store for a bit (hex wrench) to remove the hex bolt head style screws. I was only expecting to need phillips or flathead. I managed to remove one with a set of pliers, and the brought that example to the store for size reference when buying the bit to fit my black and decker drill. The rest was easy.

I removed the old gasket and cleaned the area. Then I started at the bottom and pressed the new gasket into the door. You must use firm pressure and go all around. It does get tricky hear the end as it seems like there is excess, but it will fit. Just keep using firm pressure.

The evaporator coil is behind the freezer. Remove the rack that makes the shelf and remove two 1/4” hex head screws I the back of the freezer to access the coil.
I used a hair dryer to melt the ice off the coil.
The thermostat clips on the refrigeration pipe to the coil. Remove the old thermostat and cut the wires at least a few inches from the thermostat. Clip the new thermostat on the pipe and strip about a 1/4” of the wire ends. The electrical connectors (provided with the new part) must be crimped to connect the wires.

I ordered the part and it came in two days. Very pleased with service etc... I did'nt have the model number due to the dealer removing it. This was a new refrigerator but two of the door bins were missing and it had a few dings in it. PartSelect's web site is very good. With the pictures in the web site I was able to identify the two door bins I needed. Great service and very friendly order desk.

snapped the new one in.

Ordered new part

I order my part from PartSelect and my item was delivered within two days. I just took my part and snapped it in the refrigerator door. It took less than a minute. Thanks PartSelect!

Very easy to install less than 1 min. But what I am most impressed with was with the fast service. I called an ordered part around 8am and had it the next day by 10 am with normal shipping!!! When I called and placed the order Rep was very friendly and professional. Good Job.

Super easy just snapped new bar in place. Few seconds and the shelf was usable again. Thanks so much for the quick deliver and ease of finding the product I needed. Will return for parts I may need in the future.

I am a homemaker and I did it myself in less than 2 minutes.

This was a simple repair as the shelving simply snapped in place. Like many senior citizens, I am skeptical about doing business over the net. However, I was pleasantly surprised with the service of PartSelect.com. The parts arrived promptly and appreciated the emails regarding shipping and arrival.

I had indaverently ordered the wrong part and the return process was simply a phone call away.

Thank you for the effective, efficient service. I highly recommend PartSelect.com.

took the item out of the box then I looked at it to make sure it matches .Then I opened the refrigerator put the shelf in I was done.

I just slid it right in and it worked!