KBUIT4265E (03) Thermador Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Peter from Scottsdale, AZ
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace filter
your repair video makes it simple and easy for everyone.your company is the best and I'm telling everyoneI know. GREAT
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rosa A from Laredo, TX
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
nasty tasting water and ice
very easy to install filter. unscrew and screw back in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Minneapolis, MN
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed new water filter
shipping was faster than promised. Installation was as easy as replacing a light bulb. Make sure you turn off the ice maker before removing old filter - this could save you a big mess. Also, make sure you run about a gallon of water through the system before you start using the dispenser.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from Vineland, NJ
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
poor water quality
turned the knob removed old filter, slid new filter on know and put back into fridge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from The Woodlands, TX
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
display inside refrigerator indicated time to change filter
1) Turn off ice maker 2) Remove old filter by making 1/4 counterclockwise turn 3) Insert new filter and tighten 1/4 clockwise turn. 4) Turn ice maker back on 5) Press & hold "reset" button by utilization display to return to 99% - DONE !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Springfield, IL
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
Ice make was making lil to no ice and water was coming out very slow and didnt tase good
Just took out the old water filter and replaced it with the new one i got.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Perham, MN
- Parts Used:
- EDR5RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
water running out of the top of the ice maker into the freezer
I was hesitant about calling the repair line, I thought it was a gimmick, but tried anyway since it was close to the 4th of July weekend. The repairman asked a few questions and diagnosed the problem. He said the sensor was out on the ice maker and I would have to get a new one, he gave a link to the part I needed. I was still hesitant, as I know very little about repairing appliances. Thought about it for an hour, decided to order the part, and thought I would call a repair man if all else failed and send the part back. I received the part in 3 days and it didn't look too difficult to install, I decided to give it a shot, all i have to do was take a few screws out, remove the old ice maker, and put the new ice maker in and plug it in and attach the screws, it went real well, the hardest part was finding the right size socket to fit on the screws, I turned the water back on and it didn't leak. The next day I had ice, still can't believe I did it myself. I was extremely pleased, that I didn't have to call a repairman and take a day off from work to get it fixed. I will use this sevice again.
Was this instruction helpful to you?
Thank you for voting!