Models > RF263AEBP/XAA > Instructions

RF263AEBP/XAA Samsung Refrigerator - Instructions

Jump to:

All Instructions for the RF263AEBP/XAA
16 - 30 of 34
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michael from Dahlonega, GA
Parts Used:
DA81-01346A
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Lower hinge for spring
After purchasing the spring I realized the hinge was the culprit. It has the retainer for the spring as part of it, a small plastic piece that broke off cause the spring to get lost. The hinge replacement was a little more in depth but the video on the hinge is very good and on point.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from CADILLAC, MI
Parts Used:
DA81-01345B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Broken spring on french door
Placed lower spring leg in hole first. Manipulated upper spring leg into upper hole with needle nose pliers.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deryl from KINGWOOD, TX
Parts Used:
DA81-01345B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door would not close properly
Spent a dollar 1.97 on the spring.7.00 on shipping and fixed it in less than 5 minutes.Fantastic
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Libor from Danbury, CT
Parts Used:
DA81-01345B
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
door spring
replacing broken french door spring.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from NORTHWOOD, NH
Parts Used:
DA81-01345B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Just follow instructions. Easy
Held spring with needle nose pliers and slipped into place
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from BUTTE, MT
Parts Used:
DA81-01345B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door
Replaced the spring on my French door refrigerator
Was super easy
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chris from YORK, SC
Parts Used:
DA81-01346A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Spring replacement on Mullion Door
had to replace the spring on the Mullion door . the how to video helped however the demonstration shows putting the spring on in the opposite way that my door calls for, so just I turned the spring around and done, other than that easy as pie.
thanks
Chris F.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from RALEIGH, NC
Parts Used:
DA32-00006R
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Refrigerator was too cold - down to 18 degrees Fahrenheit.
Removed shelves. Removed back cover. Removed old sensor. Installed new sensor. Replaced back cover. Replaced shelves. Works fine.
5 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharol from Culdesac, ID
Parts Used:
DA81-01345B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Brokjen spring
Lifted out the broken part and replaced with new spring.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RYAN from RIVERBANK, CA
Parts Used:
DA81-01345B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
french spring broke
after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sara from BAKERS MILLS, NY
Parts Used:
DA61-03734A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
We misplaced the mounting screws for our handles while moving.
It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.
5 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andrew from Bensalem, PA
Parts Used:
DA81-01345B
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
French spring broke.
pushed new spring in.
6 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timothy from SALISBURY, NC
Parts Used:
DA63-02284B
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Ice tray had cracked and broken. The water is still not filling up my ice tray.
The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.

*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
5 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RF263AEBP/XAA
16 - 30 of 34