RF22A4221SR (AA-00) Samsung Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from GULFPORT, MS
- Parts Used:
- DA32-10104N
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change when holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Streator, IL
- Parts Used:
- DA97-07603B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
The ice maker was overflowing and freezing over
I watched several repair videos and decided I could do this because I have been doing mechanical work for over fifty years.The videos convinced me it needed replaced it is a 2009 model I bought new. I ordered the new part from parts select it came in 3 or 4 days.The hardest part was removing the freezer door and reinstalling when I was done.That wasn’t complicated just awkward.Removing the ice maker was simple and replacing it with the new one was easy.There was a protective plate on the front of the old one that wouldn’t fit on the new one.So I left it off.So far it has been working very well.
Was this instruction helpful to you?
Thank you for voting!