Models > RFG297AABPXAC

RFG297AABPXAC Samsung Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
In Stock
The drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on the rails.
In Stock
This genuine OEM water filter is made for your side-by-side or French door refrigerator, working to reduce impurities like iron, chlorine, and rust for better-tasting water. With a capacity of 300 gal...
In Stock
In Stock
Ice Maker Assembly - 7 Cube
In Stock
In Stock
In Stock
Assembly COVER-VEG REF;AW2-P
On Order
In Stock
On Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for RFG297AABPXAC

Viewing 2 of 2
Fridge too warm
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robert from AKRON, OH
Parts Used:
DA97-05422A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice maker stopped making ice and made a repeating clicking sound
YouTube the video on how to replace the ice maker. Unplugged the fridge, one screw was removed to open a small cover panel to access where the ice maker was plugged in, unplugged the ice maker, pushed a small locking clip and pulled the old ice maker off the keyhole slots holding it in place removing it from the fridge. Did the steps in r everse and reinstalled the new one. Plugged the fridge back in and reset the fridge by holding the energy saver and alarm button on the front door simultaneously for 8-10 seconds until it beeped. Took a few seconds and the fridge reset
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
theodore from PUEBLO, CO
Parts Used:
DA31-00146E
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
freezer was cold fridge was not
Took shelving out of freezer removed panel. Took second panel
out and removed motor. Whole repair took 45 minutes. Works perfect
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CLAIRE from HGHLNDS RANCH, CO
Parts Used:
DA97-06328A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The shelve had broke do to the weight of the milk gallon - the design is poor - it’s the second time we have had to replace! The shelve cracks under the continued weight - bad design!
Changed out the piece
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!