CTF2125GRW Magic Chef Refrigerator - Parts

Sold individually.

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

This lower hinge pin is just over an inch long. It is black in color and is made of plastic. It is located on the bottom part of the door hinge.

This hinge washer is an inch in diameter. It is all black in color and is made of plastic. Sold individually.

Sold individually.

This clear fresh food control knob is almost three inches in diameter. There is blue numbering around the perimeter of the knob denoting the level of coldness inside the refrigerator.

This evaporator fan motor assembly is just over three inches long. It is made of both metal and plastic, and is made up of black, white, and metalllic pieces.

1/4" Plastic tubing, 8 1/2 feet long.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This thermostat cuts out at 38 degrees Fahrenheit. The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

This screw is sold individually.

This door gasket is used to seal the freezer door when closed.