Models > LFD25860SB > Instructions

LFD25860SB LG Refrigerator - Instructions

Jump to:

All Instructions for the LFD25860SB
76 - 90 of 116
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mike from Cedar Falls, IA
Parts Used:
4931JJ2002B, 3551JJ2019D
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The LH top door latch broke.
At first, ordered only a latch only to discover the mounting strip had instead failed. Ordering parts wasn't difficult although the parts catalog graphic leaves a lot to desire. Once I figured out how to remove the strip (had to remove the seal first and no instructions existed), it was easy to snap out the old and snap in the new part. This sure beat the cost of paying a repairman. However I fear than most homeowners that aren't mechanically inclined wouldnt have been successful because of no instructions and the parts catalog that had poor detail and a very small size.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frances D. from Oxford, OH
Parts Used:
3551JJ2019D
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Crisper Drawer Fronts Broken at Hinges
No installation instructions. I just took everything out of the shelf holding the drawers and figured it out myself. Unfortunately today's products are made with cheap brittle plastic. This is the second time I have ordered parts for this refrigerator from you and I am glad you are so efficient and shipped orders quickly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Amherst, NH
Parts Used:
3550JJ0009A, 3391JJ2012D
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The lower shelf cracked, broke and eventually fell apart. The vegetable trays cracked.
The online list of parts for this appliance was printed very small and was very intimidatingly busy. Calling the Help Center proved to be our saving grace!! The woman at the Help Center was awesome. Together, we figured what pieces I needed and they arrived within 36 hours; I was extremely impressed. The replacement parts did not include the accessories but we had the needed rollers and metal support bar from the original pieces and installed them readily on the new pieces. All went well and we are happy to have a functioning shelf and vegetable drawers again. I cannot stress enough how content we are and how thrilled I am with the personal service I received on the telephone.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Walter from Vero Beach, FL
Parts Used:
6600JB3007E, 3550JJ1070B, 3110JJ1014A
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Lights Stayed on Melted Light cover
Replaces door switches - removed screw from door hinge cover, lifted cover and removed switch. Plugged in new switch and reversed process. Removed screws from light bracket. Attached new frame to slots in roof and used screws to attach. Clipped on light cover.
Was this instruction helpful to you?
Thank you for voting!
Customer:
G.J. from WHITE BIRD, ID
Parts Used:
6600JB3007E, 3550JJ1070B, 3110JJ1014A
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Lights in upper refrigerator would not turn off with doors closed
replaced melted light covers, replaced switches, and found another problem with power circuit board relay, on order now!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Troutdale, OR
Parts Used:
6600JB3007E, 3550JJ1070B, 3110JJ1014A
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the lights inside the frig weren't shutting off
the lights melted the lamp case and cover. I determined it was the switch ,but there was 2 of them . I replaced both . I used a screw driver to pry the covers off the switches which are on the top of the unit .Then I press the tabs on the switch and pulled it out. Slip the wire connect off. slip the wire connect on new switch press it in till the tabs snap in ,put covers back on. the lamp base and cover had two screws holding them, pull the screws slip the old melted base and cover. snap the new base and cover in and put the screws in done!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Hackettstown, NJ
Parts Used:
3550JJ0009A
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
broken shelf frame
Removed two drawers and drawer covers, glass shelf and door frame. Replaced in reverse order.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from Acworth, GA
Parts Used:
3551JJ2019D
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broke the crisper drawer front
While cleaning out the frig we removed the bottom shelf to remove the glass and really scrub it down. When we went to put it back in, my wife grabbed the crisper door front and snapped it offf. I immediately went to the computer to find a replacement part and found PartSelect.com. I plugged in the model number and I immediately saw a diagram to pick out my part. I had it ordered before she got all the food back in the frig! The part arrived early and I installed it in a matter of seconds. So easy to find the part, order it and install. You have a new customer!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christopher from Portland, OR
Parts Used:
3550JJ0009A
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The drawers were sagging on one side due to broken plastic tabs
I replaced the entire plastic frame to fix the drawers. I'm frustrated that the design requires that I do this. Removed the metal bar that actually provides the support for the front of the frame and the drawers, etc. Three screws to remove and re-install. Easy. After removing the drawers, I just gently bent the drawer cover hinges to slide them out of the frame and tilted the frame out of the fridge. The glass just came out easily as it's not attached with any clips. I had to work to remove the clear plastic panels but a little careful persuasion and I was able to white supports out of the way and remove the panels. Then I removed the aforementioned bar and replaced the glass re-installed the whole assembly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phyllis from Bocca Raton, FL
Parts Used:
3551JJ2019D
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken
easy and quickly Thank you for your prompt delivery and excellant service
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cedric from Milwaukee, WI
Parts Used:
AAP73871501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken door
Simple replacement part.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brent from Cordele, GA
Parts Used:
3551JJ2019D
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
mounting tabs broken off
slightly depressed tabs, lined up to mounting holes, released tabs.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from Santa Fe, NM
Parts Used:
3551JJ2021A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken part
replace piece
Was this instruction helpful to you?
Thank you for voting!
Customer:
william from mashpee, MA
Parts Used:
4430JJ2004B, 4430JJ2004A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
broken
removed 1 screw and replaced
Was this instruction helpful to you?
Thank you for voting!
Customer:
LORI from INDIANAPOLIS, IN
Parts Used:
3551JJ2019D
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
not a problem
snap it on!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LFD25860SB
76 - 90 of 116