Models > GM-B223RQNM

GM-B223RQNM (AWBCNA3) LG Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GM-B223RQNM

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
Make use of the refrigerator door for bottles, jars, condiments, and smaller groceries with this shelf bin. It attaches inside the door to leave the main shelves less crowded. The clear front shows th...
In Stock
Order now and your part arrives by Nov 22
Controlled door travel helps prevent a refrigerator door from swinging beyond its intended opening range. This white plastic door stopper mounts near the bottom of the door and provides a stopping poi...
In Stock
Order now and your part arrives by Nov 22
$25.25
Smooth refrigerator door movement depends on a stable pivot around the hinge pin. This white plastic door hinge bushing fits inside the door and provides a low friction surface for the metal pin durin...
In Stock
Order now and your part arrives by Nov 22
This ice maker assembly is for refrigerators. This Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete ...
In Stock
Order now and your part arrives by Nov 22
This refrigerator drawer front cover and trim refreshes the pantry storage area. The clear plastic panel gives the drawer a finished appearance while keeping meats, cheeses, and snacks easy to see. So...
On Order
On Order
$25.25
In Stock
Order now and your part arrives by Nov 22
This roller assembly supports smooth movement of drawers or internal components, reducing friction and strain. Quiet, easy motion improves usability and helps prevent wear. Replacing a worn roller res...
In Stock
Order now and your part arrives by Nov 22
This water inlet valve controls the flow of water to the refrigerator’s ice maker and dispenser. It helps ensure consistent water delivery and replaces faulty valves that may cause leaks or stop dispe...
On Order
In Stock
Order now and your part arrives by Nov 22
In Stock
Order now and your part arrives by Nov 22
The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.
In Stock
Order now and your part arrives by Nov 22

Common Problems and Symptoms for GM-B223RQNM

Viewing 5 of 5
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jerry from CORSICANA, TX
Parts Used:
4984JJ3003A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
old bushing worn and broken
removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
23 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Garthlette from COVINGTON, GA
Parts Used:
6500JB2002X
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Error Code dH F
The refrigerator had the above code and when I check on YouTube, it explained that the defrosting was not working properly. It was taking more than 80 minutes to defrost. I ordered the Temperature Sensor first and it was not the issue. I also ordered the Defrost Temperature fuse or the Thermistor. I had to defrost the refrigerator first by using a portable heater to get it done quickly. (See Youtube on how to get to the Defrosting Unit inside the freezer). The Thermistor was the wrong part. I called the Partselect and explained that the part with the heating element is one piece. (Heating Coil Thermistor or Heating Coil). By replacing that piece solved the Error Code issue. I listened to Youtube for the instructions on how to replace the Heater Coil. So if you see the Error Code dH F, you need to replace the Heating Coil, which comes in
one piece and sits on the bottom of the Defrost Element.
14 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from WEST ROCKPORT, ME
Parts Used:
AEQ72909603
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
needed to replace broken ice maker
Take out 2 screws and unplug unit before removing. Plug-in new unit and screw in 2 screws. That's it.
11 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!