GM818DTWA (ATICLGY) LG Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Brent from ROGERS, MN
- Parts Used:
- 6600JB3001C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Water/ice maker not working
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from Boise, ID
- Parts Used:
- 3550JJ1033A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked Support Bracket Would Not Allow Smooth Sliding Of Vegetable Tray.
Lifted the old one out, set the new one in!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Saint Louis, MO
- Parts Used:
- 3391JJ1009B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
tray assembly broken
Filled tray and installed it in freezer. Went rather well for this being my first time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JASON from GULFPORT, MS
- Parts Used:
- 5218JJ3001A, 4981JJ2001A, 3550JJ1033A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
broken plastic supports
turned it off. took out the old and set the new in place. no tools required but did have to "pop" stuff into place. it was fairly awkward to do. Also would like to have replaced veggie bins They are cracked but these are not available. Only problem was figuring out what to order from the exploded diagram. It is very small on the computer screen and part numbers are difficult to read even with a magnifying glass
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Francisca from Reno, NV
- Parts Used:
- 3551JJ1069C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Frame of the major shelf broke
It was an easy repair, not even sure if I would call it a repair. First remove the two veggie bins and then remove the frame and glass shelf. Put the new frame I've received with the glass and slide it back in the refrigerator. Thanks to the help of the customer service rep and made sure I had the correct part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Bay Shore, NY
- Parts Used:
- EAG62831801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Interior Light Would Not Turn Off
Tape off the light button so door alarm does not go off. Take off the clear light shield and remove the light bulbs. Be careful, bulbs may still be HOT!! With Phillips head screw driver unscrew the light plate assy. Drop it down in a comfortable position. Disconnect the connector, unscrew the thermal sensor and remove light assy. Install new light assy into light plate assy. There is no thermal senor in the new assy. Snap light plate assy back into place and install the two screws previously taken out. Install bulbs and clear cover. Remove tape from light door switches and you are done. Lights should go on and off when door buttons are pushed in and out.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Jeffersonton, VA
- Parts Used:
- 3550JA1388B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
top light cover was warped. Simply replaced it with another.
Inserted it with my hands.
Was this instruction helpful to you?
Thank you for voting!