GRL288NSJP (ASTCNA0) LG Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William from Little Elm, TX
- Parts Used:
- AAP73631501, MEG61899901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door holder broken, door basket cracked
Door holder, really simple, remove two phillips head screws, throw awy old holder, replace with new, reinstall two screws. Door basket, slide out old basket, replace with new. Prices were more than fair, delivery very prompt. Will use again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LISA from GREENE, ME
- Parts Used:
- AJP73594404, AAP73631501, AGF80300702, AAP72909204
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I had three broken baskets for the door and a broken tray in the freezer that needed replacement
I tried looking up the parts list on line as I didn't have the book readily available. This was the site I found that had a nice Break up of the refrigerator and all of the parts. I was able to easily spot the parts I needed, plus the part number and I ordered everything. I received my items quickly and they were packaged well. The installation was very easy and I feel great that I have working parts that look great and I will definitely purchase from these folks again!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from Baytown, TX
- Parts Used:
- AEQ73110205
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice Maker quit working
Removed 4 Stainless steel screw holding mounting assembly containing ice maker and motor. Unplug large plug from refrigerator inside wall and removed assembly. Closed refrigerator and lay asembly on flat surface. Removed ice maker plug from wire harness. Unscrewed ice maker mounting screws from mounting assembly. Reversed process to install new icemaker. Be sure to turn ice maker plug assembly to fit in holder on back of assembly and tape back in mounting assembly so assembly wil go all the way back in the door without forcing. If done properly, the ice bucket will slide in easily and the door to ice maker compartment will close easily without any problems.
Was this instruction helpful to you?
Thank you for voting!