LRSXS2706V (APZCNA0) LG Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tom from COPPER HILL, VA
- Parts Used:
- EAU65058502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Evaporator fan making noise
Turn off the power to the refrigerator. Remove the back plate. Unplug the fan motor. Remove the fan housing and pull the fan blade from the motor. Replace the motor by removing 4 screws. Replace with the new motor and reinstall the fan blades. Secure the fan housing, plug the fan motor, and screw on the back panel. Plug and go!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Seaford, DE
- Parts Used:
- ACZ74390702
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
ice tray froze in place and motor broke tray and gear in motor
shut off ice maker in door and removed bin and top cover, removed two bottom screws and middle screws and loosened top screw and assembly pulls uot from the bottom and unplug the unit. After the new ice maker unit is installed turn on the ice maker to highest setting for 24 hours and throw the ice away. then reset for maxium ice making for the next 24 hours and you have a bin full of new ice
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- HEIDI from HINCKLEY, OH
- Parts Used:
- 4987JJ1010Y
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
I needed a new gasket
I didn't because the part was never delivered.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brent from ROGERS, MN
- Parts Used:
- 6600JB3001C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Water/ice maker not working
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Was this instruction helpful to you?
Thank you for voting!