KBRS36MHB01 KitchenAid Refrigerator - Parts

The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process un...

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

The defrost timer works on a predetermined schedule, to alternate between the cooling cycle and the defrost heater in your freezer. When the heating circuit is activated, it melts any ice that has for...

Door switch turns the light off when you close the door.

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

Metallic screw that is less than an inch long. Does not include the plastic washer.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

Sold individually.

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

This part screws into the side of the wall in your fresh food compartment and supports a shelf.

This is a compression nut for your refrigerator/freezer. The compression nut is used with the plastic water line for the icemaker assembly. It is the connection between the water supply line and the o...