KSCS25FJSS01 KitchenAid Refrigerator - Parts

Sold Individually - Appliance originally takes 2.

Sold individually.

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This dispenser door pin comes with the washer.

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

Sold individually.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

16ml

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

This part is used to hold eggs.

This white icemaker assembly washer is less than an inch long.