KSRL25FRSS00 KitchenAid Refrigerator - Parts

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This clip is sold individually.

This dispenser door pin comes with the washer.

This door gasket is used to seal the freezer door when closed.

Support wheel assembly with bracket. Kit of 2.

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This screw is sold individually.

16ml

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

This white icemaker assembly washer is less than an inch long.

This part works in conjunction with the blades for the ice maker.