KSSC48FKB02 KitchenAid Refrigerator - Parts

This ice and water filter is NSF-certified to filter out sediment, chlorine, and lead to improve the taste and odor of your water. It is recommended to change the filter every six month, or after 200 ...

The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process un...

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Door switch turns the light off when you close the door.

The bi-metal defrost thermostat is attached to the evaporator, and its purpose is to protect the evaporator from overheating when the defrost cycle is running. If there is frost building up in your fr...

This black water filter cap is located near the bottom kickplate.

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

Metallic screw that is less than an inch long. Does not include the plastic washer.

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.