KFIS25XVMS2 KitchenAid Refrigerator - Parts

This package contains one individual water filter that is NSF-certified, and OEM approved. To ensure that the filter is successfully removing contaminants, it will need to be replaced at least every 6...

This pantry end cap kit is used to keep your refrigerator drawer from sliding all the way out. This kit includes both the right and left side end caps, and the pins which hold them in place. The manu...

The capacitor, also known as a run capacitor, is a component in your fridge that allows the compressor to cycle on and off to maintain a constant temperature. If your fridge and freezer are too warm i...

Also known as a duck bill. This kit includes the tube extension piece and spacer.

This part includes one authentically sourced 3-pin rocker switch for a refrigerator. It is responsible for turning the light on inside the fridge when the door is open. It is commonly replaced because...

This part helps keep everything inside the drawer, it acts as a cover and also keeps you drawer at the proper temperature by creating a seal.

This cap is used when bypassing the filter.

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...

Glass NOT included. If you are looking for the center rail see related parts below. This is used for the crisper drawer in the refrigerators

This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This kickplate grille is attached to the bottom of the refrigerator.