KBFL25EVMS1 KitchenAid Refrigerator - Parts

Need to keep your fridge’s water and ice working while the filter is out? This bypass cap lets water flow to the dispenser and ice maker without a filter. It’s easy to install and fits Whirlpool, Mayt...

This frame supports the crisper drawer in your fridge and holds the shelf that acts as its lid. It helps keep produce fresh by allowing proper airflow and contains spills with its raised edges. If you...

This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This kickplate grille is attached to the bottom of the refrigerator.

This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...

This is just the bottom glass cover for the crisper drawers. It does not include the frame.

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.