KBFS20ETBL00 KitchenAid Refrigerator - Parts

This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold and to the water line.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This kickplate grille is attached to the bottom of the refrigerator.

Commonly referred to as the flapper assembly, the door mullion is an important part of a double, or triple door refrigerator.

The door gasket is used to make an air-tight seal for the cabinet when the door is closed.

This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...

Long harness thermistor kit.

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will covert the heat into cool air, which is then circulated.