KBRS20ETSS00 KitchenAid Refrigerator - Parts

Need to keep your fridge’s water and ice working while the filter is out? This bypass cap lets water flow to the dispenser and ice maker without a filter. It’s easy to install and fits Whirlpool, Mayt...

This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold and to the water line.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This kickplate grille is attached to the bottom of the refrigerator.

Long harness thermistor kit.

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will covert the heat into cool air, which is then circulated.

The fan blade is used to blow air over the condenser.

This refrigerator defrost thermostat is a temperature-sensitive safety component designed to monitor the evaporator coils and regulate the defrost cycle. By activating the defrost heater only when nec...