KSSS48DAW03 KitchenAid Refrigerator - Parts

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

Sold individually.

This is a compression nut for your refrigerator/freezer. The compression nut is used with the plastic water line for the icemaker assembly. It is the connection between the water supply line and the o...

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

This part attaches to the drive shaft of the ice dispenser motor.

This water inlet valve is for the ice maker and water dispenser in the refrigerator. To remove outlet tubing, depress ring that the tube slides into. Please remember to disconnect the power and water ...

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

Sold individually.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

Part may differ in appearance, but functions same as original.