KSSP48QMS03 KitchenAid Refrigerator - Parts

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

*Please note, this door chute is no longer being manufactured with a heater.

Metallic screw that is less than an inch long. Does not include the plastic washer.

This part is the drive shaft for the auger.

This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...

This part is a replacement flipper or emitter cover for your refrigerator. It is made of white plastic and is approximately 3 inches by 2 inches. The flipper shields the emitter control board and hous...

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer ...

This kit includes the stripper arm and fill cup.

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

This part screws into the side of the wall in your fresh food compartment and supports a shelf.