KSSP48QHT00 KitchenAid Refrigerator - Parts

This part attaches to the drive shaft of the ice dispenser motor.

Sold individually.

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This dispenser door pin comes with the washer.

Sold individually.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

Part may differ in appearance, but functions same as original.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

This part is used to hold eggs.

This white icemaker assembly washer is less than an inch long.