Models > KSSC42QVS00 > Parts

KSSC42QVS00 KitchenAid Refrigerator - Parts

Jump to:

1 - 12 of 339
Keep searches simple, eg. "belt" or "pump".
It is recommended to replace your refrigerator water filter every 6 months or 200 gallons of water. This will ensure consistently good-tasting water that is free of pollutants. This NSF-certified filt...
In Stock
Order now and your part arrives by Nov 21
Behind the ice maker cover, this refrigerator control module and motor assembly drives the ejector and organizes the ice-harvesting sequence. It coordinates loosening the cubes, releasing them, and re...
In Stock
Order now and your part arrives by Nov 21
If the cap for your water filter has become damaged, this is an authentic OEM replacement part that is black in color. The cap is used to remove the old filter and insert the new one. Be sure to first...
In Stock
Order now and your part arrives by Nov 21
The refrigerator door switch turns the interior light off when the door closes. If the light is not working, the switch may be the cause. This is an OEM replacement. Confirm compatibility using your r...
In Stock
Order now and your part arrives by Nov 21
Bring light back to the appliance?s interior with this incandescent bulb. Light from its filament spreads through the clear glass, making stored items easier to locate and reach. A damaged bulb or bur...
In Stock
Order now and your part arrives by Nov 21
The emitter and receiver in this OEM ice level control board kit use an infrared beam to sense the ice level in the bucket. If your ice maker is not making ice, this is one part to check. The beam sig...
In Stock
Order now and your part arrives by Nov 21
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
In Stock
Order now and your part arrives by Nov 21
The white, four-blade OEM evaporator fan blade moves cold air over your refrigerators evaporator coils. A noisy fan or a warm refrigerator can indicate a problem with the blade. Check your refrigerato...
In Stock
Order now and your part arrives by Nov 21
*Please note, this door chute is no longer being manufactured with a heater.
On Order
$7.60
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Nov 21
This refrigerator ice dispenser drive shaft seal forms a barrier around the shaft beneath the ice bucket. It helps keep moisture and condensation from reaching the auger motor and inner door area. Wit...
In Stock
Order now and your part arrives by Nov 21
This refrigerator ice level emitter flipper cover is used to help control the light beam used to monitor the ice supply. The white plastic flap pivots on a spring-loaded hinge beside the ice bucket. C...
In Stock
Order now and your part arrives by Nov 21
1 - 12 of 339