KSRG25FKST17 KitchenAid Refrigerator - Parts

This dispenser door pin comes with the washer.

This door gasket is used to seal the freezer door when closed.

Support wheel assembly with bracket. Kit of 2.

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

Sold individually.

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan. Please note: If the original fa...

This is a kickplate, but you may also know it as a grate or a grille. It is a part for your refrigerator. The purpose of the kickplate is to allow air to circulate by flowing through the grates and in...

This screw is sold individually.

16ml

This white icemaker assembly washer is less than an inch long.

This part works in conjunction with the blades for the ice maker.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice when activated.