10657577791 Kenmore Refrigerator - Parts

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

16ml

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

This part is used to hold eggs.

This white icemaker assembly washer is less than an inch long.

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Sold Individually - 2 screws needed to mount each handle.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".