Models > 2536880201A > Instructions

2536880201A Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 2536880201A

Customer:: John from Pilesgrove, NJ
Parts Used:: 240360801
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lost the temperature control know

The knob came in the plastic package. It was the correct part. I opened the package and placed the knob on the prongs. Now it works fine.

Thanks
John S.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Deborah from Zephyrhills, FL
Parts Used:: 240534901
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Bottom shelf bar broke.

Ordered the part. When it arrived (extremely fast delivery), took the old part off and put the new part in. Perfect fit. Took less than one minute to exchange the old with the new.

Thanks a lot for such a wonderful, pleasant experience. Would heartily recommend your services to anyone in the market.

D. Hall

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: ruth from toledo, OH
Parts Used:: 240358008
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

I purchased a refrigerator for the first time, and didn't realize it lacked a freezer shelf!

The part fit perfectly. I simply placed the ends on the holes on the side wall inside the refrigerator, and the other end of the shelf slipped right into the matching holes on the other side. That easy!

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Carlene from DOERUN, GA
Parts Used:: 240350608
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Broke glass on crisper

Just slide glass in. Very easy.

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jane from EAST JORDAN, MI
Parts Used:: 241733911
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver

You have sent the wrong part for the THIRD time. You have sent aaccess cover that is TWO INCHES too short. It does not cover the opening, and you will not answer your phones.

There is no way to complete the repair with the wrong part, You have had my order since June 22nd, 2020 and the incorrect part arrived October 27th, 2020. You charged $7.79 plus $1.06 tax and $9.95 shipping. Please refund the entire amount including the shipping, since I did not ask you to ship the incorrect amount.

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gabrielle from DERBY, CT
Parts Used:: 240534701, 240534901
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

2 shelves were broken and missingg

I (female) fixed it by just inserting the brackets. Easy as pie. I was so happy that they fit.

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: DONALD from TOPEKA, KS
Parts Used:: 240337103
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

refrigerator crisper pan broken

replaced it

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: edith from woodbridge, VA
Parts Used:: 240314011, 240311303, 240516502, 240313703
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

refer door hinges were lost during the move in to our first home.

The center door hinge was still attached to the refridgerator so I only had to install the bottom and top hinges. I also moved the door handles to the other side so the doors open the "right" way. The hinges were just 2 bolts and 3 screws. Now, just if the repair man from our home warrentee company would show up to fix the refridgerator. It's blowing hot air!!!

8 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mary from EDMONDS, WA
Parts Used:: 240534701
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replace broken shelf protector

simply put the protector shelf bar on shelf !! easy

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ben from FRANKLIN, TN
Parts Used:: 240524102
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Noisy condenser fan

Remove lower cardboard refrigerator panel. Carefully pull existing cracked fan blade off of the motor shaft and replace with new fan blade. Reinstall cardboard panel.

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Susan from VIRGINIA BCH, VA
Parts Used:: 241554901
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

Door switch was no longer making my light go on when door opened

I used the youtube you provided. It was pretty straight forward, but I had to make a trip to the hardware store for a bit (hex wrench) to remove the hex bolt head style screws. I was only expecting to need phillips or flathead. I managed to remove one with a set of pliers, and the brought that example to the store for size reference when buying the bit to fit my black and decker drill. The rest was easy.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: JACOB from YOUNGSTOWN, OH
Parts Used:: 241537103
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Refrigerator did not cycle

Installation was fairly straight forward. The major complaint is that the problem returned 2 weeks later. I don’t know if I care to re-invest in another switch.
Now what?

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Janette St from KALISPELL, MT
Parts Used:: 240534701
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Had a broken part in the door that holds condiments in

Removed broken part and then snapped in new part

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Cristina from MARLBOROUGH, MA
Parts Used:: 242193213
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins

Old gasket was torn and falling out

I removed the old gasket and cleaned the area. Then I started at the bottom and pressed the new gasket into the door. You must use firm pressure and go all around. It does get tricky hear the end as it seems like there is excess, but it will fit. Just keep using firm pressure.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from BRONX, NY
Parts Used:: 240534901
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Bar had broken

Simply replaced by hand. No tools necessary

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 2536880201A