Models > 25372623013 > Instructions

25372623013 Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 25372623013

Customer:: Steve from Salem, NH
Parts Used:: 241796405
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers

leaking water onto the evap fan freezing causing alot of noise

1st a changed the defrost stat. Waist of time. Realized there was no evaporator above fan. Noticed ice was builing up behind ice maker near fill tube. Found if I shut off ice maker ice wasnt building up on fan. Moved fridge out unplugged fridge unscrewed plastic nut. Turned 90 degrees. Replaced tube locked in place . Screwed nut back on . Plugged in and turned ice maker on. Wife happy ice was back on and no noise.

Was this instruction helpful to you?

Customer:: Gregory from Stowe, VT
Parts Used:: 5303918202
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers, Wrench set

Fridge too warm. Top Freezer cold.

I hesitate to say anything since I did exactly what their video told me to do, and it fixed the problem. Couldn't be happier. Was positive I was looking at 1000$ for a new fridge. Love being able to fix it by installing 15$ part myself. Thanks guys.

Was this instruction helpful to you?

Customer:: Randy from Shamokin, PA
Parts Used:: 5303918202
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins

frost build up on freezer coil

purchased a defrost theromast,took about 20-30 minutes to take apart & put back together.delivery was in one day from the time of my purchase.thanks for all ur help &prompt delivery.

Was this instruction helpful to you?

Customer:: Kenneth from Allen, TX
Parts Used:: 5304469403
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The ice maker quit making ice.

I noticed that the two gears weren't meshing together so upon inspection I saw that one of the gears had an inner piece missing making it weak so it kept popping out away from the other great. I ordered the new gear and unscrewed the old one off and put the new one on. So easy. It made Ice beautiful after that

Was this instruction helpful to you?

Customer:: G V from Bowie, MD
Parts Used:: 242252603
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Wrench (Adjustable)

No ice - Replace water valve

TURN OFF WATER!! UNPLUG REFRIGERATOR!! Remove water fittings and electrical connector on old valve. Remove two mounting screws on pump bracket. Reverse procedure to install.

Was this instruction helpful to you?

Customer:: William from Miami, FL
Parts Used:: 5303918202
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Freezer cold and frig warm

Replaced evap motor. Everything is strong and running like a champ. Partselect video examples were very helpful. Would order parts again on next problem. Thanks

Was this instruction helpful to you?

Customer:: james from vandergrift, PA
Parts Used:: 240524102
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

while cleaning the condenserI accidentally hit the fan blade and broke it

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.

Was this instruction helpful to you?

Customer:: Judith from Spring Hill, FL
Parts Used:: 5303918202
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Evap coil was solid ice, fridge was 64 degrees.

Exactly as the video showed, except I had to take the evap coil cover off and use a hair dryer to thaw it out. It was still frosting up too much, so I ordered the thermostat as well. Both were really easy, once i saw the location of the defrost timer and the thermostat. Thanks for the great site, prices that put the big store to shame, and the good video too!

Was this instruction helpful to you?

Customer:: Michael from Rockford, MI
Parts Used:: 5303918774
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

Rattling Noise from behind frig

Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.

Was this instruction helpful to you?

Customer:: francis from arlington, WA
Parts Used:: 241537103
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

has lights,no fan or compressor

jump thermostat,fan and compressor came on, ordered thermo from this excllent parts supplier, part came in 4 days later, it was exact replacement, works exactly right!

Was this instruction helpful to you?

Customer:: Laurie from Meridian, ID
Parts Used:: 5303918202
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Refrigerator section warm

My husband watched the video on your website and found it very easy to do the repair. The repair company that diagnosed the problem wanted $210 to do it. The part I ordered was under $20, and after he installed it the refrigerator has been working great. We would highly recommend your site to anyone who needs to fix anything!

Was this instruction helpful to you?

Customer:: Lawrence from Stow, OH
Parts Used:: 241796405
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers

Ice Maker not getting any water

1). Shut off water supply to fridge. 2). Move fridge out to gain access to back of fridge. 3). Remove poly line to water tube have a glass handy to catch any remaining water that might be in line. Some may have a foam insulating washer around water tube remove it first. 4). My Sears-Kenmore was a twist lock water tube have to turn it to left or right depending on brand to remove tube. 5). After removing make sure tube didn't just have water frozen in tube ( that was my problem ) run it under hot water frozen piece will come out. 5). Problem fixed, reverse directions to re-install tube!

Was this instruction helpful to you?

Customer:: Paul from Akron, OH
Parts Used:: 241798231
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Ice maker quit working.

The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul

Was this instruction helpful to you?

Customer:: Albert from Jefferson, MD
Parts Used:: 215846604
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Freezer always has ice accumulating

Thermostat assembly, remove light bulb, remove 1 screw, drop thermostat casing, two screws to remove timer from inside and install in reverse. Old Timer had electric motor and lasted 30 years. New one looks to be electronic with plastic motor gears.

Was this instruction helpful to you?

Customer:: Deborah from Ridge Spring, SC
Parts Used:: 240524102
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Broken blade on fan.

Used needle nose pleirs to slide the old fan off.Then slide the new fan on the spindle.The video really made this easy!

Was this instruction helpful to you?

All Instructions for the 25372623013