All Installation Instructions for Kenmore Refrigerator 25372629015

Customer:: WILLIAM from EL PASO, TX
Parts Used:: 240535201
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken Door Rack

No tools were required to install

Was this instruction helpful to you?

Customer:: Ron from Tiffin, OH
Parts Used:: 240535101
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Needed a replacement for a broken doo rack

Snapped right in place, no problems at all.

Was this instruction helpful to you?

Customer:: Eugenia Van Bremen from New York, NY
Parts Used:: 240535101, 240535201
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

the racks on my doors had snapped and I needed new ones

I just put them right on. Took about a minute to figure on the right way to put the racks on (push them down from the top, until they snap into place), and it was done in less than five minutes. I was worried that this wouldn't work - I couldn't find the exact item # to replace the racks that had been on there. But it turns out that they are pretty interchangeable - the sub racks that the website suggested worked perfectly for me.

Was this instruction helpful to you?

Customer:: James M from Charlotte, NC
Parts Used:: 240535001
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

Replacing a freezer door rack

It was a perfect fit and snapped into place in seconds. No instructions were required.

Was this instruction helpful to you?

Customer:: Richard from Boise, ID
Parts Used:: 242252603
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set, Wrench set

Ice maker no working

Removed water line. Removed two screws holding valve. Disconnected line from valve going to Ice maker. Replaced screws and water line. Most important thing in working with Parts Select was the information they provided when I called them. I had called electrolux and was given no information and was told they would send out a repairman at which point I told them to get lost. Cost of part $30.00 vs service call of $75.00.

Was this instruction helpful to you?

Customer:: Melissa from Anderson, IN
Parts Used:: 240524102
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

Broken fan blade ,I forgot to unpluge before cleaning

I did it just like the video it was that easy! love this web site amazing!

Was this instruction helpful to you?

Customer:: Jesse from Woodstock, GA
Parts Used:: 242252603
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Valve nut stripped

Old part threads : made in China (brass) New part : made in Mexico (steel). First, unplugged it from the wall. As for the valve, removed the two screws holding the valve in, disconnected the plug, took the pipe cutter, cut the blue line to the ice maker, cleaned up the cut, pushed that line into the new one and reassembled. Done!

Was this instruction helpful to you?

Customer:: Harry from Colonia, NJ
Parts Used:: 240535101
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

shelf bracket broken

2 screws out ,bracket out,bracket in,2 screws in DONE

Was this instruction helpful to you?

Customer:: David from DeSoto, TX
Parts Used:: 240535101
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Door rack cracked in the middle.

Glued and taped old door rack until new part arrived. Perfect fit.

Was this instruction helpful to you?

Customer:: G V from Bowie, MD
Parts Used:: 242252603
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Wrench (Adjustable)

No ice - Replace water valve

TURN OFF WATER!! UNPLUG REFRIGERATOR!! Remove water fittings and electrical connector on old valve. Remove two mounting screws on pump bracket. Reverse procedure to install.

Was this instruction helpful to you?

Customer:: Rusty from Howell, NJ
Parts Used:: 5303918774
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Socket set

Fan would stop or turn slowly. outside of refridg hot

took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.

Was this instruction helpful to you?

Customer:: Kenneth from Allen, TX
Parts Used:: 5304469403
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The ice maker quit making ice.

I noticed that the two gears weren't meshing together so upon inspection I saw that one of the gears had an inner piece missing making it weak so it kept popping out away from the other great. I ordered the new gear and unscrewed the old one off and put the new one on. So easy. It made Ice beautiful after that

Was this instruction helpful to you?

Customer:: Gaylord from Riverside, CA
Parts Used:: 242252603
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Wrench (Adjustable)

Ice cubes were half the normal size to none at all

Remove back cover (5 screws )remove valve ( 1 screw ).Disconnect in and out water lines. Disconnect wire on solenoid. Install in reverse. Dont forget to turn off water.

Was this instruction helpful to you?

Customer:: Kenny from Olton, TX
Parts Used:: 242252603
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

valve busted

I took 2 screws loose and undone water lines, replaced and reconnected everything. Real easy

Was this instruction helpful to you?

Customer:: Ronald from Ft. Myers Beach, FL
Parts Used:: 5304469396
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

arm wouldn't go all the way down and dump ice

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

Was this instruction helpful to you?

25372629015 Kenmore Refrigerator - Instructions