25361780019 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Harry from Colonia, NJ
- Parts Used:
- 240535101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
shelf bracket broken
2 screws out ,bracket out,bracket in,2 screws in DONE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from DeSoto, TX
- Parts Used:
- 240535101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door rack cracked in the middle.
Glued and taped old door rack until new part arrived. Perfect fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Hicksville, NY
- Parts Used:
- 215846604
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Fridge section not cold enough, Frost in freezer
Very easy to do, as per the video instructions.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Grant from Apache Junction, AZ
- Parts Used:
- 241554901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Light Would Not Come On.
I removed the four bolts holding the light switch and temp knob with a nut driver, unplugged the unit and moved it to the table top. I removed the switch and replaced it with a new one. I plugged the unit back in and drove the four screws in with a nut driver and the light now comes on when I open the door. Real simple!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mike from apollo, PA
- Parts Used:
- 240530701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
meat drawer guide broke
take the shelf out,loosen screw,put on new rail and reattach screw,simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Bellerose Manor, NY
- Parts Used:
- 240530811
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new drawer for refrigerator to replace broken one.
I broke my drawer on a holiday Monday and Tuesday morning I had the new one in. your party was an exact match, even though the description said it might not be.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roberta from Clovis, CA
- Parts Used:
- 240530701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The Drawer Support Right Side Broke At The Front Tab & The Drawer Fell Down
Took The Shelf Out That The Drawer Was Attached To.Turned It Upside Down.Took The 1 Phillips Screw Out At The Back That The Drawer Slide Was Attached To.Slid The Tab Into The Front Guide,Lined The Screw Hole In The Back Up And Replaced The Screw...Done...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from City of Commerce, CA
- Parts Used:
- 240530701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
shelf support broke
screwdriver that's it took 2 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ANN from SNYDER, TX
- Parts Used:
- 240530701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
rail broke
remove shelf,unscrew rail, put in new rail,put in screw, return shelf
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from Circle Pines, MN
- Parts Used:
- 240530701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken right rail to dràwer.
The part came right away, It only took me a couple of minute's to fix. I just flipped the shelf around. Slid one end of the rail in a slot, and put one screw in on the other end. Finished.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bert from Saint Augustine, FL
- Parts Used:
- 240535101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Door Rack
Snapped new door rack into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Corpus Christi, TX
- Parts Used:
- 240530601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
support rail broke when overstuffed meat drawer forced closed
Disassembled shelf and drawer to find broken rail. Found parts number on website's "exploded" parts view. Reassembled with new part and drove one screw to secure. FORTUNATELY I kept old broken part which had special screw needed to reassemble. I would have expected replacement part to include its attachment screw, but it did not.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margaret from Norman, OK
- Parts Used:
- 240364503
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The crisper pan cracked
I took the cracked pan out, waited for the new pan to arrive (2 days) and slid the new pan right in. It was so easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLIAM from EL PASO, TX
- Parts Used:
- 240535201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Door Rack
No tools were required to install
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joan from oak lawn, IL
- Parts Used:
- 240530701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
my parents pushed down to hard on the meat drawer and snapped the support glides off.
My sisters and mother were going to call the repairman. I looked at it and thought I could easily repair it. I ordered the part. Just like all the reviews said it took longer to clear off the shelf and take it out of the fridge than it took to repair it. I figure only call for service when it is something you really cannot repair. Thanks!!!
Was this instruction helpful to you?
Thank you for voting!