25368822010 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Leonard from Harlingen, TX
- Parts Used:
- 241872503
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Ice build-up in freezer; gasket needed replacing
It is easier to remove the door, put towels over the goods in the freezer and put the door on a flat surface. Pry up the old gasket gently; it just snaps in, so don't worry. Snap in the new gasket, screw the door back on, and you're set to go. We were scared at first, but it's really a simple operation.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeff from Green Bay, WI
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken clip on the shelf on the bottom of the door
I watched the short repair video that was provided for the do it yourself persons.And I put the new shelf in place in the door myself it was fast and easy .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from HELENA, AL
- Parts Used:
- 218906802
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Getting the light socket to snap back in properly
It snapped in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betsy from Battle Creek, MI
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken upper door bin
I received the lower door bin rather than the upper one that was needed. Ordered the correct one and it was received the next day. Both parts were received the next day. I appreciate the ultra-prompt service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MARK from LITTLE NECK, NY
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The bottom door shelf would fall off even if there weren't a lot of jars and bottles on it.
All we had to do was remove the bad door shelf by just taking it off - very easy to snap off - it takes about 10 seconds. Then we replaced it just as easily. The new one fits perfectly and we can put many bottles and jars on it, thus giving us more room on the shelves in the refigerator to store things.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- nestor from Edinburg, TX
- Parts Used:
- 242193213
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door wont close
its real easy, just by pulling the old gasket, in some spots the gasket was like glued, but with a flat screw driver a managed to pulled apart. finally,just attached the new gasket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Katy, TX
- Parts Used:
- 242193213
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
torn door gasket
Opened refrigerator door, opened a Corona, took a sip,removed old gasket from its track by simply pulling out of the track with my fingers; took another sip, installed new gasket by lining it up and pressing it into the track with my thumbs (It's good to have opposal digits) starting at the top center and progressing clockwise, closed refrigerator door, minus one Corona. Sat on the patio and enjoyed the rest of my Corona. Life's good!
Was this instruction helpful to you?
Thank you for voting!
Flimsy door shelves
Ordered replacements here and they arrived quickly. The hardest part of the install was opening the well-secured package. The shelves easily snapped in place (a little tighter than original equipment). The repair was complete before the FedEx truck drove away!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Billiejean from West Bloomfield, MI
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Shelf broke
Snapp back on less than 30 seconds
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jay from Bethel Park, PA
- Parts Used:
- 242193213
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked gasket on fridge door
Used screwdriver to pry off edge of old gasket corner and peeled off old gasket. Snapped new gasket into door channel and made sure all the edges were seated. Took longer to open the shipping package than to do the repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christine from East Orange, NJ
- Parts Used:
- 240358008
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
No freezer shelf
Out the package and into the freezer, no tools needed, I am very happy, my stuff are now organize , no more heaps of stuff
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vernia from Maywood, IL
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Shelf door broken apart in the middle
Removed the old door (squeeze a little at the ends), Took the new part out the box, and snapped it on. Too easy! This is my 2nd time ordering a shelf door from Parts Select and both have been great experiences! They are super fast, reasonably priced and the instructions/locating the part process is really easy and thorough! I can extend my appliance life a little longer with Parts Select. Thank you so much as this is a money saver.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from West Sayville, NY
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The bottom shelf bin that attaches to the refridgerator door was cracked
The schematics on the website allowed me to pick the exact part I needed. The repair was easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe N from Alliance, NE
- Parts Used:
- 240350608
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Crisper's Glass Top Broken
Placed glass into front edge of frame first then gently lower the back side down into position
Was this instruction helpful to you?
Thank you for voting!