1069532980 Kenmore Refrigerator - Parts

This part attaches to the drive shaft of the ice dispenser motor.

This water inlet valve is for the ice maker and water dispenser in the refrigerator. To remove outlet tubing, depress ring that the tube slides into. Please remember to disconnect the power and water ...

This part screws into the side of the wall in your fresh food compartment and supports a shelf.

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This kickplate grille is attached to the bottom of the refrigerator.

Support wheel assembly with bracket. Kit of 2.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This part helps to slide the drawer in and out. It mounts to the inside wall of your refrigerator.

This part helps to slide the drawer in and out. It mounts to the inside wall of your refrigerator.

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

This white icemaker assembly washer is less than an inch long.