59676513500 Kenmore Refrigerator - Parts

Glass NOT included. If you are looking for the center rail see related parts below. This is used for the crisper drawer in the refrigerators

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

Commonly referred to as the flapper assembly, the door mullion is an important part of a double, or triple door refrigerator.

This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...

Long harness thermistor kit.

Frame not included.

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side ...

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

The fan blade is used to blow air over the condenser.

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

Note: Part has been redesigned by the manufacturer and will appear different than the original, but will function the same. This evaporator fan motor is located in the back of the freezer, and circ...