59666039603 Kenmore Refrigerator - Instructions

Removed the glass shelf, position the rail in its slots and replaced the glass shelves.

Removed both crispers and shelf . Inserted new rail as explained in video. Replaced everything.

Followed easy instruction video. It was like new in fifteen minutes.

Found instructions on You Tube how to replace Jazz P/C Board Replaced board and manually defrosted evaporator coil.Everything seems to be working fine

Refrigerator completely quit due to suspected power surge as a result of daily afternoon thunderstorms. Quit means compressor would not run, LED temperature controls would not light, but fan continued working. First, replaced Start Relay & Capacitor located attached to compressor. This was successful and compressor immediately started. However, Refrigerator controls at Electronic Control Board (ECB)failed to light up indicating no control over over unit. Replaced ECB and unit lit up and control established. The Start Relay & Capacitor are slightly difficult to find as they are black in color and merge into the base of the compressor. It helps to be flexible to remove and replace this unit due to it's difficult location. The ECB is easy to access as it is top inside front behind lights of unit. Plastic housing simply unsnaps for easy removal. Instructions do not tell you to make sure that you re-install the upper narrower control board with press pins toward outside of control face. A simple item but easily overlooked as one has to "pull" at the connecting cable of the two control boards. Success finally after three days. Parts Select was great and item shipped quickly. As a contractor, one can usually figure cost of job at three times the cost of the part. This repair would have approached $600. Cost of parts was $200. Savings were substantial and would recommend DIY provided you have time.

This is the 2nd Jazz board that we replaced in 2 years. We believe that a power surge caused the board to no longer work. We now have the fridge plugged into a surge protector. The instruction sheet to program the jazz board did NOT come with this part. I called Parts Select and they gave me a number for Whirlpool. I spent over 30 mins. talking to Whirlpool, 2 different departments, and they do not have instructions for this part. I was told that they only supply instructions for about 10% of the parts that they distribute. I was able to find the instruction sheet on my own but searching "whirlpool instruction 16022940." I hope this helps!

Thanks for the control board. However, it arrived in two days not overnight, UPS noted on their tracking site the error was their own. Also, the part did not come with installation instructions or programming instructions. Found on youtube a video that described in detail the programming procedure: . . . . . very helpful.

Thanks,
Marc

I watch a widea on part select 'how to do that' and was relly very easy to repleace a part. The delivery was next day. They are triting customers very serious and professionals. I'll recomended part select for all my friedds with similar problems. Thank you.

After plugging in the new relay to no avail. I replaced the thermostat. That fixed the problem.

first unplug unit, remove clear light cover it snaps out. there are 2 slots on either side of the light housing stick the screw driver in the slot and push the tab and pull down this will unlatch the control board housing, remove the board socket plugs, and the board from the frame, on the new board you will have to snap the PC board at the pre indented line. replace in reverse and follow instruction to program the code.

Took off the shelf abovethe rail and slid into the receiver in back and front. BTW, cant say enough good about the customer service received from Part Select! They were awesome!

Remove plastic vent cover. Just snaps out. Take out two screws that hold damper cover on. Unclip and unplug damper assembly. Snap in new assembly and plug in. Replace covers. I was pretty sure this would fix my problem after observing the damper for several days. It would stay open and when I moved it by hand it would open a little more and then close. Easy fix!

Removed the two drawers and shelve. Inserted the new crisper rail. Replaced the two drawers and put the shelve back in. Took maybe 10 minutes. Did not need any tools.

I removed the glass on top of the Crisper and replaced the Rail and then replaced the glass. Done

I was so happy to find that i could order the part online and not have to call a repairman and pay for a service call. The prat shipped in one day! It was very easy to install. Only tip i will give is, make sure you put it in the right direction. If placed in wrong the drawers won't open.