59676579600 Kenmore Refrigerator - Parts

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

Commonly referred to as the flapper assembly, the door mullion is an important part of a double, or triple door refrigerator.

This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...

This kickplate grille is attached to the bottom of the refrigerator.

Long harness thermistor kit.

Sold Individually.

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side ...

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

This door gasket is for refrigerators. The door gasket is on the inner door panel and creates a seal around the door to prevent warm air from entering the refrigerator.

The fan blade is used to blow air over the condenser.

This refrigerator defrost thermostat is a temperature-sensitive safety component designed to monitor the evaporator coils and regulate the defrost cycle. By activating the defrost heater only when nec...