59666039602 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Burton from Pecatonica, IL
- Parts Used:
- WPW10662129
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Heard a five second buzzing sound repeated 4 or 5 times per cycle coming from rear lower left compressor side.
Removed the six screws holding the bottom access plate found at the rear of the refrigerator. This gives you easy access to the run capacitor that has a retaining clip. Remove the wire clip and pull out the capacitor (it has two quick disconnect terminals). Reverse the process using the new run capacitor to complete the repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard A. from Boones Mill, VA
- Parts Used:
- WPW10196393
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Milk was freezing in Refig section, 28 F temp
Noted the Damper Assemby in the upper rear of refrig section,was always staying open during checks for problems. Controls appeared to be controlling temp changes when adjusted. Pulled the damper assemby after removing two screws holding the diffuser/cover(diffuser pops off with screwdriver) Damper assembly snaps out , unplug wires, snap new damper assembly in place, reconnect wires at the plug, replace cover with foam insulation, secure with screws replace diffuser snaping in place. Recheck settings for desired temperatures.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sheila from Folsom, LA
- Parts Used:
- WPW10128551
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Fridge section too warm and freezer cold
The unit has two fans on it. One is located in the back and the other is locate inside the freezer section behind the panel. Remove the four bolts holding the door to the sliding rack. Remove the ice machine. Remove the back panel. Noticed that the fan was covered in ice thus shorting the fan motor. Tested for voltage to the fan was good. Replaced evaporator fan motor and unit works perfectly
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ed from Varna, IL
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Crisper rail broke
Took off the shelf abovethe rail and slid into the receiver in back and front. BTW, cant say enough good about the customer service received from Part Select! They were awesome!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Decatur, GA
- Parts Used:
- WPW10196393
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Food Freezing
Remove plastic vent cover. Just snaps out. Take out two screws that hold damper cover on. Unclip and unplug damper assembly. Snap in new assembly and plug in. Replace covers. I was pretty sure this would fix my problem after observing the damper for several days. It would stay open and when I moved it by hand it would open a little more and then close. Easy fix!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeannette from Cadiz, KY
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Center Crisper Rail Broke
Removed the two drawers and shelve. Inserted the new crisper rail. Replaced the two drawers and put the shelve back in. Took maybe 10 minutes. Did not need any tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Cusseta, AL
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Center Crisper Rail
I removed the glass on top of the Crisper and replaced the Rail and then replaced the glass. Done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laura from Fort Lauderdale, FL
- Parts Used:
- WPW10671238
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
rail that is the glide for the crisper drawers broke
I was so happy to find that i could order the part online and not have to call a repairman and pay for a service call. The prat shipped in one day! It was very easy to install. Only tip i will give is, make sure you put it in the right direction. If placed in wrong the drawers won't open.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Marysville, WA
- Parts Used:
- W10833528
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken crisper drawer
It took more time to open the shipping box than to slide the drawer into place :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Adam from Randolph, ME
- Parts Used:
- WPW10662129
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Frig not cooling.
After plugging in the new relay to no avail. I replaced the thermostat. That fixed the problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carol from decatur, IN
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The center crisper rail broke.
First of all, I watched the very helpful video on your site, when the part arrived, I installed the rail all by myself...I am a female, and it was very easy..thank you for the video information, very helpful..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lynne M. from York, PA
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Flange on the original center crisper rail cracked off
Not including the time I spent to thoroughly clean the shelf, 2 crisper bins and the bottoms and sides of the inside of the refrigerator, having been faced with the obvious opportunity, this job takes about 30 seconds! After clearing, carefully lift the glass shelf from its frame, remove the broken rail and insert the new rail. Lower the glass shelf into the frame. Voila! Fini!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cheryl from San Mateo, CA
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rail broken
The website, customer service, part, and one day delivery were very amazing to my husband and me. We will deal with PartSelect whenever possible. EVERYTHING re: the transaction including wonderful video instructions were A++ Many thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sarah from dearborn, MI
- Parts Used:
- WPW10662129
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Compressor having hard time kicking on
I simply watched the repair video and did it! Super easy, needed start device and capacitor. As easy as unplugging the old and adding the new. The video helped and gave me confidence. Wives can fix fridges too! Saved me $2500. Looks like I'll need a new excuse if I want a new fridge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Columbus, OH
- Parts Used:
- WPW10671238
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken center crisper rail
These plastic storage refrigerator racks can break relatively easily. Fortunately, the replacement of the center crisper rail is very easy. Just remove all the food items from the flat shelf above the crispers. The flat shelf (glass in our model) comes out as well as the crispers. When you remove the shelf and crispers, the center crisper rail is replaced by turning the frame upside down. It fits right in and is secure when you turn the frame upright. Don't try to make this replacement in situ, too many fragile plastic tabs that can possibly break.
Was this instruction helpful to you?
Thank you for voting!