Models > 3638604681 > Instructions

3638604681 Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 3638604681
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Anita from Shawnee, OK
Parts Used:
WR24X437
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
ineffective frige door gasket due to stretching
I pulled off the old gasket and pressed in the new one. That's it!
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Cheraw, SC
Parts Used:
WR24X437
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
mositure and tempature
First the Kenmore refrigerator was listed as most parts as not available on the Sears web site.
The old gasket was split in several places and moisture and mildew was part of the clean up. Because of the cold weather at the time of shipment the note about using warm water to soften the gasket so it would be more pliable was extremely helpful.
I was also reversing the door swing and found that it was not that hard , it took about 45 minutes and was done the 24ft frig is now working great
Thank

Mark
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephanie from DENVER, CO
Parts Used:
7C7
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
drum light burned out
removed the bulb from the package unscrewed the old bulb & screwed in the new bulb.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jimmie from Surprise, AZ
Parts Used:
7C7
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bulb burned out.
Screwed new bulb in socket
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from HAZELHURST, WI
Parts Used:
7C7
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The light bulb in my freezer door burned out.
Remove the burned out bulb and install the new light bulb.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Winston from BRONX, NY
Parts Used:
WR24X437
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
leaking water from casket seal
Remove old gasket by pulling out one corner at a time and Installing it by placing it in the grove.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3638604681
1 - 6 of 6